jallenl Posted May 12, 2014 Share Posted May 12, 2014 (edited) Upgraded to windows 7, 32 bit. Installed my LOR software and have used it to do some more programing for 2014 show. Everything was fine until I realized that I had not installed my 485 converters and drivers. I have tried everything to get the lights to work after the install and cannot get them to work. Control lights is check. I have set up the preferences for the network. I have two computers set up this way both with the same problem. S3 software very glitchy since this was done. Unplugging the USB 485 adapter fixes all of my issues, so the problem has to be with the adapter install. Any assistance would be greatly appreciated. Used the latest drivers on the LOR website believe they are 2.08.30. All works fine on Hardware utility also. Edited May 12, 2014 by jallenl Link to comment Share on other sites More sharing options...
Frank Farmer Posted May 12, 2014 Share Posted May 12, 2014 Do have the COM port#'s matching in Windows Device manager with LOR's network settings?The COM port#'s may have changed after the Windows 7 upgrade/install. Link to comment Share on other sites More sharing options...
jallenl Posted May 12, 2014 Author Share Posted May 12, 2014 (edited) Working again Edited May 14, 2014 by jallenl Link to comment Share on other sites More sharing options...
Recommended Posts