Orville Posted November 21, 2012 Share Posted November 21, 2012 wow a cat 5 cable. even when my controller does not have a cat 5 cable in it still is stuck on channel 6 reset the board still stuck. considering reloading firmware to correct?No cat5 and nothing connected to a controller and a channel is stuck on = BAD Triac! You'll have to replace the triac on Channel 6. This is how my controller #03/Channel 5 does currently. So I only use that channel as a full on, IF I use it at all. I usually cap it off with an outlet cover and not use it.After Christmas I'll remove the controller and replace the bad triac. Link to comment Share on other sites More sharing options...
Recommended Posts