bubba reed Posted December 13, 2009 Share Posted December 13, 2009 :shock:When I plug in the cat 5 cable to my cosmetic color ribbon I can not find any of the controllers and random lights start coming on and off. :? Can anyone help me fix this?Thanks Link to comment Share on other sites More sharing options...
ItsMeBobO Posted December 13, 2009 Share Posted December 13, 2009 Blue eye shadow doesn't go with your hair!Using the hardware utility. First set your max unit id to F0. Then refresh and it should find your CCR. Link to comment Share on other sites More sharing options...
melwelch Posted December 14, 2009 Share Posted December 14, 2009 With the random lights I say you have a controller with the same ID as the CCR... Connect the CCR ONLY to your PC then use Hardware Utility to set it to something different...I stayed with it's ID set to "1". And moved my old #1 to an ID not in use. To do this unplug the CCR and rescan for controllers. Then change controller with ID #1 to an ID not used... You must have the CCR shut down to do this... Link to comment Share on other sites More sharing options...
bubba reed Posted December 16, 2009 Author Share Posted December 16, 2009 i have checked it dose it have to be on the same phase as the mp3 Link to comment Share on other sites More sharing options...
ItsMeBobO Posted December 16, 2009 Share Posted December 16, 2009 Maybe you could rephrase the question.If you have random lights coming on, my guess is the CCR is getting commands intended for other controllers. You must set the Unit id or at least determine what it is and change your channel config of your sequences to match it. Link to comment Share on other sites More sharing options...
Recommended Posts