ICEPICK Posted November 18, 2009 Share Posted November 18, 2009 I've been trying to get the hardware utility to recognize a wirless unit and I get an "unable to lacate unit" error, even though I get a red blinking light. Can anyone help?Regards,RussellThousand Oaks, Ca Link to comment Share on other sites More sharing options...
Don Posted November 18, 2009 Share Posted November 18, 2009 ICEPICK wrote: I've been trying to get the hardware utility to recognize a wirless unit and I get an "unable to lacate unit" error, even though I get a red blinking light. Can anyone help?Regards,RussellThousand Oaks, Cahttp://lightorama.com/help/index.html?whats_new.htmWhat's New in Version 2.6.0Bug Fixes"In the Hardware Utility, controllers that were connected via Easy Light Linkers were not showing up in all cases." Link to comment Share on other sites More sharing options...
ICEPICK Posted November 18, 2009 Author Share Posted November 18, 2009 Don, thanks for the reply. I do have version 2.6.0 and still have the issue.Russell Link to comment Share on other sites More sharing options...
Frank A. Posted November 19, 2009 Share Posted November 19, 2009 good morningon the hardware utility screen is therean 'ell' shown between the firmware and lights off buttonon the bottom row ?if yes select lor rf from top rowget current configurationdocument all sections frequency speed power leveldisconnect this linker from cat 5 and plug second linker into this cat5get configuration and make sure they matchFrank A. Link to comment Share on other sites More sharing options...
ICEPICK Posted November 19, 2009 Author Share Posted November 19, 2009 Thanks to all for your suggestions. I didn't have my comm setting correct and the hardware utility wasn't recognizing the wirless units. Have a great holiday!!!! Link to comment Share on other sites More sharing options...
Recommended Posts