captainron19 Posted September 7, 2009 Share Posted September 7, 2009 First year user here. I ordered my 32 channel startup package the other day. It isnt even in yet and I decided it was time to upgrade :]So I am looking at the LOR store and I see the 16 channel add on but I also see it is available in either 15 amp or 30 amp.My question is... what is the amperage of the 2 units that come with the starter package? Couldnt find it on the website and as I said before my units havent arrived yet. Link to comment Share on other sites More sharing options...
cmoore60 Posted September 7, 2009 Share Posted September 7, 2009 I believe the units you ordered are probably with 2 input cords. That is 15 amps per side, 30 amps for the entire unit.Chuck Link to comment Share on other sites More sharing options...
captainron19 Posted September 7, 2009 Author Share Posted September 7, 2009 cmoore60 wrote: I believe the units you ordered are probably with 2 input cords. That is 15 amps per side, 30 amps for the entire unit.ChuckYes now that I look at the startup package I do see 2 plugs. Any recommendation on if I should go with the 30 amp or 15? I know a lot depends on how much I run off of the units.I am mostly using LED light strings Link to comment Share on other sites More sharing options...
cmoore60 Posted September 7, 2009 Share Posted September 7, 2009 All of my controllers are set up with one power input cord. I use mostly LED lights. I personally don't see a need to have the 2 power input cords if you don't need the capacity.Chuck Link to comment Share on other sites More sharing options...
Denny Posted September 7, 2009 Share Posted September 7, 2009 I have a mixture of incandescent and LED and I run all my controllers off one power cord. You can always upgrade to 30 amps by removing the jumper between the two sides and installing a second power cord if needed. Link to comment Share on other sites More sharing options...
Recommended Posts