Frank Rossi Posted September 1, 2009 Share Posted September 1, 2009 Last year I built 5 LOR 16 channel boxes and all worked fine. This year I am building 4 more and looking for a fast way to test. I selected steady ON and take one string of lights and plug it to each channel and do the same in twinkel and shimmer. That should check all of the functions? I know I am not doing fades and some other functions but it seams to me, if I test the three items above that should mean the LOR is working as planned.What do you all thinK? Link to comment Share on other sites More sharing options...
vipzach Posted September 1, 2009 Share Posted September 1, 2009 I finished my first controller last night and that is exactly what I did.Only difference was I plugged in 16 different light set so I could make sure that it would all run at the same time. Link to comment Share on other sites More sharing options...
friskybri Posted September 1, 2009 Share Posted September 1, 2009 I used to do that. Now once the board is complete I plug in the power cords then use the crimp ends of one cord and plug the neutral in and the other to each of the hots to do a quick check. That way u can test all channels in less then two minutes Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now