zman Posted May 12, 2009 Share Posted May 12, 2009 I revamped my DMX material for the WA State Mini a few weeks ago. I also set up a How-To section on my site and posted some info there. If anyone is interested, check it out. Link to comment Share on other sites More sharing options...
Glyn Holland Posted May 13, 2009 Share Posted May 13, 2009 zman wrote: I revamped my DMX material for the WA State Mini a few weeks ago. I also set up a How-To section on my site and posted some info there. If anyone is interested, check it out.Looks really good Zman! I am just trying to get started in DMX with a Chauvet moving spot light. There was a lot of info packed in your How-To. Thanks for your hard work putting it together. Link to comment Share on other sites More sharing options...
zman Posted May 13, 2009 Author Share Posted May 13, 2009 I hope it helps folks, it was fun putting together, I learned a lot too along the way. Which Chauvet moving spot do you have? Link to comment Share on other sites More sharing options...
Charles Belcher Posted May 15, 2009 Share Posted May 15, 2009 Mark,Where do you find the time? So much information.Charles Link to comment Share on other sites More sharing options...
zman Posted May 15, 2009 Author Share Posted May 15, 2009 Charles Belcher wrote: Mark,Where do you find the time? So much information.CharlesThanks Charles. I started it last year for our Mini and really went after it to refine it for this years get together.Time,...... Here is my tag line from CC:Time is of the Essence - And There is Usually Not Enough of it!NO DOUBT! Link to comment Share on other sites More sharing options...
Recommended Posts