Ponddude Posted January 21, 2009 Share Posted January 21, 2009 So I got my iDMX 1000 last week and my moving head today. Last week I was able to connect to the iDMX and got a solid light and everything. Today when I got to use it I don't get any status light what so ever. Doesn't come on, no blinks...nothing.I am powering it from a nearby LOR controller.Like I said, last week it worked fine, not I get nothing.Any ideas? Link to comment Share on other sites More sharing options...
LightORamaDan Posted January 21, 2009 Share Posted January 21, 2009 A couple of posiblities. One is that the unit is not getting power from the controller so doulble check the cable, try a different controller if you have one.Try a reset, to reset it you disconnect then hold in the select button while you plug it in.It may have just decided to die but that does not seem too likely.Dan Link to comment Share on other sites More sharing options...
Ponddude Posted January 21, 2009 Author Share Posted January 21, 2009 I should have mentioned this, but I tried the reset. I will go get another controller and see what I get. Link to comment Share on other sites More sharing options...
Ponddude Posted January 21, 2009 Author Share Posted January 21, 2009 Alright, I switched out controllers, I switched out cat-5 cables and nothing is powering it back up.Any more ideas or do I have a dead unit?Thanks for your help Dan! Link to comment Share on other sites More sharing options...
LightORamaDan Posted January 21, 2009 Share Posted January 21, 2009 Well it does not sound good. Send an email to support@lightorama.com and tell them that you have a iDMX1000 that seems to have stopped working. Link to comment Share on other sites More sharing options...
Ponddude Posted January 21, 2009 Author Share Posted January 21, 2009 Thanks Dan...Just sent an email. We will see what happens. Link to comment Share on other sites More sharing options...
Recommended Posts