IATCUYB Posted December 19, 2008 Share Posted December 19, 2008 We are having a problem with one musical sequence. We use the MP3 hardware utility to put the show on the SD card and when we go to put the card into the MP3 player this is what happens:The lights ERC chase while the P light stays lit. Then a pause and then the R & C light flash twice very quickly together. When the R & C lights flash quickly I can hear some "clicking" sounds from the radio. The sequence never plays.We tried reformatting the card, updating the firmware, simple show builder, and even resetting the card...etc.We even tried putting one of our Halloween sequences back on the card and it work just fine.Also, one other thing, when using the laptop to run the show, this sequence runs just fine....TIA for any help Link to comment Share on other sites More sharing options...
displaysinmotion_will Posted December 19, 2008 Share Posted December 19, 2008 what format is the audio? Link to comment Share on other sites More sharing options...
-klb- Posted December 19, 2008 Share Posted December 19, 2008 Have you used Audacity to convert to 128K constant bit rate? Apparently some versions of windows media player do not do it correctly... Here is the instructions for using Audacity to do it:http://lightorama.com/Documents/Audacity_Lame_128Kbps.pdf Link to comment Share on other sites More sharing options...
IATCUYB Posted December 20, 2008 Author Share Posted December 20, 2008 Thank you very much. Converting the MP3 again using Audacity - Lame worked like a charm.Really appreciate the help. Link to comment Share on other sites More sharing options...
Recommended Posts