kirkmbrown2001 Posted December 15, 2008 Share Posted December 15, 2008 Ok, So last night the light-o-rama was running and then I kept blowing fuses. I replaced them and then thought of moving the channels around to even out the load. I then tried it again and it worked. Then channels 1, 2 and 3 stopped working. I plugged the lights into a wall outlet and they worked so it is definatly LOR that is the problem. 1, 2 and 3 won't work in the show or the hardware utility. I called tech support and told me to reset the box with still no luck. I tried calling tech support back and I am still in line to be called back. I have tried everything I can think of and don't know what else to do. I have only had it running one night without problems so I really want it running. Since I was having trouble with the fuses, do you think a bad fuse can cause the partial failure? I hope it is nothing major. Thanks for your help!Kirk Link to comment Share on other sites More sharing options...
LightORamaDan Posted December 15, 2008 Share Posted December 15, 2008 Sounds like the card has been damaged. Send an email to support@lightorama.com, include your order number or the name and address on the order. Link to comment Share on other sites More sharing options...
Recommended Posts