Jump to content
Light-O-Rama Forums

DMX Box


cm11599ps

Recommended Posts

Right now you need a, iDMX1000 to control any DMX device with LOR software. LOR does not support any other converters. Maybe some day they will support USB/DMX converters or even better support for Artnet.



Steve

Link to comment
Share on other sites

If you want to use the LOR software to control LOR hardware you need on of the LOR USB-RS485 adapters... If you want to use LOR software to control DMX, you need that plus one or more iDMX units. If you want to use some DMX control panel, or DMX automation software to control LOR boxes, you need all the stuff to get signals down a DMX cable, plus the adapter to go from standard DMX cables to the LOR proprietary pinout on the RJ-45 connector...

Link to comment
Share on other sites

-klb- wrote:

If you want to use the LOR software to control LOR hardware you need on of the LOR USB-RS485 adapters... If you want to use LOR software to control DMX, you need that plus one or more iDMX units. If you want to use some DMX control panel, or DMX automation software to control LOR boxes, you need all the stuff to get signals down a DMX cable, plus the adapter to go from standard DMX cables to the LOR proprietary pinout on the RJ-45 connector...

Don't forget the firmware update- if you have older boards
Link to comment
Share on other sites

  • The topic was locked
Guest
This topic is now closed to further replies.
×
×
  • Create New...