Original CCR with enhanced networks question.

[Box on Rails]

I have 12 original Cosmic Color Ribbons with controllers that were given to me 3 years ago. I have tested them all and they all work good. I have never tried to use them in my show but for 2024 I am thinking about putting then to good use. that is if the controllers will work on an enhanced network. So that is my question to the Hardware experts. Will The Original CCR controller work with an enhanced network so I can Use Motion Effect on them? 

[Mr. P]

Yes they will, up to a 500K speed. You can check all equipment speeds here:

https://store.lightorama.com/pages/how-many-lights-can-i-connect?_pos=1&_sid=0481efb29&_ss=r#section2

[Box on Rails]

54 minutes ago, Mr. P said:

Yes they will, up to a 500K speed. You can check all equipment speeds here:

https://store.lightorama.com/pages/how-many-lights-can-i-connect?_pos=1&_sid=0481efb29&_ss=r#section2

Thanks 

[k6ccc]

Note that they MAY require a firmware update.  If they have original firmware, they will not handle ELOR.  They came out long before ELOR was invented.  However a firmware update will fix that issue.  Same situation with original CCPs.

 

[Box on Rails]

4 hours ago, k6ccc said:

Note that they MAY require a firmware update.  If they have original firmware, they will not handle ELOR.  They came out long before ELOR was invented.  However a firmware update will fix that issue.  Same situation with original CCPs.

 

Thanks Jim. That was going to be a possible second question. 😉