deblen Posted November 29, 2008 Share Posted November 29, 2008 Hi,I went to program my SD card, get to the part to se3lect the file, which I clicxck on to select.The trouble is that the file does not show in the box, to indicate what file I just selected.I have tried several files, not one will show.Last year I had no problems, in selecting the files.Any suggestions.ThanksDeblen Link to comment Share on other sites More sharing options...
Guest wbottomley Posted November 29, 2008 Share Posted November 29, 2008 How are you programming your sd card?Using the hardware utility or the simple show builder. Link to comment Share on other sites More sharing options...
Scott Laska Posted November 29, 2008 Share Posted November 29, 2008 Check you channel config and make sure there are no extra contolers showing. delete all extra contolers. Second check the bit rate on songs 128 kps. If you need to change the rate inport into Audacity the export as MP2 Link to comment Share on other sites More sharing options...
deblen Posted November 29, 2008 Author Share Posted November 29, 2008 Hi,I am using the Hardware utility. ver 1.66Checked all Controllers, Bit rate is 128.Still will not copy file.I even tried the files from last year, no changes, that weere copied to the card, these too, do not get copied.Deblen Link to comment Share on other sites More sharing options...
Guest wbottomley Posted November 29, 2008 Share Posted November 29, 2008 Have you upgraded to LOR 2?If so, your hardware utility didn't upgrade.That's where I think the problem lies. Link to comment Share on other sites More sharing options...
deblen Posted November 30, 2008 Author Share Posted November 30, 2008 Hi,I noticed that there were 2 LOR's in the Start/run/Program's, as I have upgraded to ver 2.I deleted all LOR, re-instaled.I checked the Ver it was ver 2.016.It now works.Thanks to Mountainwxman, ver pointing me in the right direction.Len Link to comment Share on other sites More sharing options...
Recommended Posts