RaiderMochie Posted September 2, 2022 Share Posted September 2, 2022 Are the 10w floods limited to just being 100% on and/off or can I adjust them to be 20% illuminated (dimmed). I can't seem to find any illumination level in sequencer. I want my floods at a very low level for spooky Halloween ambiance, not blasting out 100% full light power Link to comment Share on other sites More sharing options...
k6ccc Posted September 2, 2022 Share Posted September 2, 2022 No different than mostly any other light - any level that you want. Link to comment Share on other sites More sharing options...
RaiderMochie Posted September 2, 2022 Author Share Posted September 2, 2022 (edited) I can't get them to be any level I want, only on or off. They don't even fade up or down. I can get them to change color, but not light level. Any suggestions? Edited September 2, 2022 by RaiderMochie Link to comment Share on other sites More sharing options...
TheDucks Posted September 2, 2022 Share Posted September 2, 2022 (edited) 43 minutes ago, RaiderMochie said: Are the 10w floods limited to just being 100% on and/off or can I adjust them to be 20% illuminated (dimmed). I can't seem to find any illumination level in sequencer. I want my floods at a very low level for spooky Halloween ambiance, not blasting out 100% full light power LOR 10W flood dim very nice (I have 16). I just recently added a few Warm White 10W floods (not LOR) that I converted from 12/24V AC/DC non-dimmable for use on my Flags and other places where White only is wanted. (Ungroup a RGB channel for 3 individual outputs) FWIW they look IDENTICAL to the LOR RGB except if you look at the LED. 4 floods for $35 If folk are interested, I can work up a conversion (soldering required) https://drive.google.com/file/d/1ZckorLGwjuGiUdzKNigeFKOnuuKqu8H_/view?usp=sharing https://drive.google.com/file/d/1_rnzG-1vqKTwKHlEUllu0I43TAFom8cn/view?usp=sharing Edited September 2, 2022 by TheDucks added links to images Link to comment Share on other sites More sharing options...
Jimehc Posted September 2, 2022 Share Posted September 2, 2022 Dimming Curve or Intensity Setting Link to comment Share on other sites More sharing options...
TheDucks Posted September 2, 2022 Share Posted September 2, 2022 1 minute ago, RaiderMochie said: I can't get them to be any level I want, only on or off. They don't even fade up or down. I can get them to change color, but not light level. Any suggestions? You might have set the wrong controller model Do they behave in HU Link to comment Share on other sites More sharing options...
pouterson1 Posted November 28, 2022 Share Posted November 28, 2022 On 9/2/2022 at 5:25 PM, TheDucks said: LOR 10W flood dim very nice (I have 16). I just recently added a few Warm White 10W floods (not LOR) that I converted from 12/24V AC/DC non-dimmable for use on my Flags and other places where White only is wanted. (Ungroup a RGB channel for 3 individual outputs) FWIW they look IDENTICAL to the LOR RGB except if you look at the LED. 4 floods for $35 If folk are interested, I can work up a conversion (soldering required) https://drive.google.com/file/d/1ZckorLGwjuGiUdzKNigeFKOnuuKqu8H_/view?usp=sharing https://drive.google.com/file/d/1_rnzG-1vqKTwKHlEUllu0I43TAFom8cn/view?usp=sharing Where do you get those spikes for the floods? Thanks. Link to comment Share on other sites More sharing options...
TheDucks Posted November 28, 2022 Share Posted November 28, 2022 1 hour ago, pouterson1 said: Where do you get those spikes for the floods? Thanks. Holiday Coro or Wired Watts They are very slightly different. Link to comment Share on other sites More sharing options...
pouterson1 Posted December 11, 2022 Share Posted December 11, 2022 Ok, thanks. I appreciate it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now