Idk what else would cause this.

[weigh2fast4u@yahoo.com]

I have 90 brilliant bulbs on a port on one of my pixies

of course,,, they all work in HU,

I have channel level enabled on the prop in S5,

my configuration is correct. Unless I’m missing something…. 
 

when I play a song, only 36 of them are getting lights on them.

the previous port is working fine. And has the correct number of lights that are working. So no light effects are going pass where they need to be on the previous port..

I am running enhanced.

I have also tried other ports.
 

in HU, I have my maximum pixels per port set at 160.

I’ve updated the firmware on the pixie. 

im wondering if this needs to go in an S5 thread. 

What else could it be?

[dibblejr]

Anyone reading this 

Ensure you are assigning the Unit IDs controlling each prop correctly to include Hexadecimal.

After speaking with my friend on the phone, checking a few settings in HU and NP.

As soon as I saw his prop def saw that he didn't include the Hex numbers. His unit ID started with 9 on a pixie8 and went in non hex 9,10,11,12,13,14,15 and 16, They should have been 9,0A,0B,0C,0D,0E, 0F and 10.  Quick change and all was well.

JR 

[weigh2fast4u@yahoo.com]

THANKS JR!