Shannon Posted October 21, 2019 Share Posted October 21, 2019 I HAVE MOSTLY PIXELS UP AND FIRST TIME LEARNING THE LOR SYSTEM. I HAVE EVERYTHING UP AND RUNNING FOR THE SHOW BUT HAVE SOME LAGGING. BIGGEST PROBLEM IS CCR2 IS RUNNING 2 WINDOWS AND BOTH ARE PROGRAMMED THE SAME COLOR . RED WITH SHIMMER. PORT ONE IS BLUE AND PORT 2 IS RED . IVE TRIED SEVERAL TIMES TO CHECK THE COLOR AND SEQUENCER AND THEY MATCH. I HAVE 2 OF THESE UNITS DOING THE SAME THING. ANY SUGGESTIONS WOULD BE MUCH APPRECIATE. THANKS Link to comment Share on other sites More sharing options...
dibblejr Posted October 21, 2019 Share Posted October 21, 2019 (edited) 1 hour ago, Shannon said: I HAVE MOSTLY PIXELS UP AND FIRST TIME LEARNING THE LOR SYSTEM. I HAVE EVERYTHING UP AND RUNNING FOR THE SHOW BUT HAVE SOME LAGGING. BIGGEST PROBLEM IS CCR2 IS RUNNING 2 WINDOWS AND BOTH ARE PROGRAMMED THE SAME COLOR . RED WITH SHIMMER. PORT ONE IS BLUE AND PORT 2 IS RED . IVE TRIED SEVERAL TIMES TO CHECK THE COLOR AND SEQUENCER AND THEY MATCH. I HAVE 2 OF THESE UNITS DOING THE SAME THING. ANY SUGGESTIONS WOULD BE MUCH APPRECIATE. THANKS Go to HU Hardware Utility and use the configuration tab to adjust the RGB order. Also are they the same mfg of pixels? BTW- please turn off caps. JR Edited October 21, 2019 by dibblejr Link to comment Share on other sites More sharing options...
Recommended Posts