Mike Anderson Posted June 21, 2019 Posted June 21, 2019 Will the 10 watt RGB flood extension cords work for the Pixie 2/bullet nodes if they have the same number of pins? Need a few extra feet and have extra cords for the floods. Pretty sure I already know the answer, just wanted to ask the experts. Thanks Mike
Mr. P Posted June 21, 2019 Posted June 21, 2019 1 hour ago, Mike Anderson said: Will the 10 watt RGB flood extension cords work for the Pixie 2/bullet nodes if they have the same number of pins? Need a few extra feet and have extra cords for the floods. Pretty sure I already know the answer, just wanted to ask the experts. Thanks Mike They won't have the same number of pins as the floods are dumb and use four pins the Pixies will use three pins.
TheDucks Posted June 21, 2019 Posted June 21, 2019 A few old ones used 4 pins, but the newer ones are 3 This may help a bit http://www1.lightorama.com/pixel-extensions/
Mr. P Posted June 21, 2019 Posted June 21, 2019 The original CCRs were four pin as they used LPD6803 pixels which had a separate clock wire. The pixies all use three wire and the dumb RGB uses four.
Recommended Posts