JimCanfield Posted July 4, 2008 Share Posted July 4, 2008 I updated my software and opened the sequence editor and it gaveme a window saying that open of port serial port has failed. I do no think it is because of the upgrade. My question is do I just neeed to re do what I did to assign the usb port when I first hooked my controller to the computer? Sorry I amm not knowledgeable of the terminology. Link to comment Share on other sites More sharing options...
Guest wbottomley Posted July 4, 2008 Share Posted July 4, 2008 Just reassign the port and you should be ok. Link to comment Share on other sites More sharing options...
JimCanfield Posted July 4, 2008 Author Share Posted July 4, 2008 Ok will try that, thank you. Link to comment Share on other sites More sharing options...
cmoore60 Posted July 4, 2008 Share Posted July 4, 2008 Jim,You did not mention if you have a USB device connected. You will get an error when you launch the sequence editor with no port talking to the controllers.Chuck Link to comment Share on other sites More sharing options...
JimCanfield Posted July 4, 2008 Author Share Posted July 4, 2008 nope there was no usb device connected. I accidently opened the sequence editior instead of the schedule editior and that message popped up so I figured something had happened. So all looks ok thank you Chuck. Link to comment Share on other sites More sharing options...
Recommended Posts