jmraider Posted October 14, 2017 Share Posted October 14, 2017 I am trying to determine if I do not use the full 16'4' of the CCR for my tree, what will be the visual effect on my sequences. I plan to start the CCR ribbons at the top and go down, and leave the excess ribbon at bottom. I am planning to build it approx. 12'6" instead of the full 16' I am using the Super Star Instant sequence to for my sequences with most of my songs for the tree only. A few songs I have purchased pre-done sequences for the 16CCR tree. Any advice will be helpful or if there is a specific distance I should go, let me know. Thanks Link to comment Share on other sites More sharing options...
Dennis Laff Posted October 15, 2017 Share Posted October 15, 2017 If you bought sequences for a ccr tree thats full size top to bottom I don't think you can use that sequence on a shorter tree with out awful lot of editing . Link to comment Share on other sites More sharing options...
k6ccc Posted October 15, 2017 Share Posted October 15, 2017 I'm with Dennis on that one. You really want to use all 50 pixels - especially on purchased sequences. For what it's worth, my tree is 122.5 inches from the center of the bottom pixel to the center of the top pixel, but in my case I'm using square node pixels so I could build it any length that I wanted. http://www.newburghlights.org/pixel_tree.html Link to comment Share on other sites More sharing options...
Recommended Posts