AussieXmas Posted December 3, 2016 Share Posted December 3, 2016 Hi, I have a Pixcon 16 board which was working in last night in the show when I had unplugged it and have taken it inside as i wanted to change a few settings, I set it up as normal it powers up and goes to stand by mode power solid status heart beat but the router will not find the Pixcon 16 board i am dumb founded as it was running on the same laptop last night but now it doesn't find it at all I'm leaning towards the ethernet port as the data light is constant solid and doesn't change green does nothing, wondering did i miss something or is there another way to connect it up with other port but i don't have that knowledge and there isn't much on this board out there so forum is my only hope as I don't have the enhanced cable but can i use that port in the same way as the program ethernet port. Any help will be appreciated as now one major part of my show is out. Link to comment Share on other sites More sharing options...
Recommended Posts