Premier Posted November 30, 2016 Share Posted November 30, 2016 (edited) first year using CCP's, have had RGB floods for two years, and 5 PC16 controllers License-Pro-8CCR, LOR version 4.3.x Issue; Last two years all controllers along with floods work fine. controllers assigned to units 1-5, floods assigned to 0A, all have worked well for me. this year picked up 3 CCP's, assigned 0B-0C, 0D-0E & 0F-10 all run on hardware utility, all units found and working correctly, Amending a previous sequence with what i added from PE, saved to sequencer file and intensity data saved run the sequence from SE, only the floods and the 3 CCP's work, all standard controllers wont light Run a sequence without the PE track added, everything runs great, except of course no CCP's What am I missing to get everything to run right? Appreciate any ideas, Edited November 30, 2016 by Premier Link to comment Share on other sites More sharing options...
Mr. P Posted November 30, 2016 Share Posted November 30, 2016 Update controllers to the latest firmware. Link to comment Share on other sites More sharing options...
Premier Posted November 30, 2016 Author Share Posted November 30, 2016 thanks Mr. P., but issue remains Updated all firmware to latest version, controllers 01 - 16PC-G3 Ver 1.08, 02 - 16PC-G3 Ver 1.08, 03 - 16PC-G3 Ver 1.08, 04 - 16PC-G3 Ver 1.08, 05 - 16PC-G3 Ver 1.08, 0A - CMB24D Ver 1.05, 0B - CCB100 Ver 1.21, 0D - CCB100 Ver 1.21, 0F - CCB100 Ver 1.21 Like I said, all controllers work from Hardware utility just fine, all units found. Now, doesn't matter if I run an old sequence without any CCP Tracks/PE Props or not, none of the 16PC controllers will work under the SE with the Control Lights feature checked marked. Arrgh, frustrating Link to comment Share on other sites More sharing options...
Premier Posted December 1, 2016 Author Share Posted December 1, 2016 I got it!!!! thanks to reading other posts I finally think I got it to work. Had to check network config, ELOR was on, but at 55k, changed to 115 k and it seems as though now everything works. Just posting this in case someone else with similar issue reads this. doing my happy dance now...thanks to everyone in the forums! Link to comment Share on other sites More sharing options...
Crimson Lane Lights Etown Posted December 10, 2016 Share Posted December 10, 2016 I also added 200 CCB's this year, and before I made changes, the Network Preference was 57.6k (recommended). I noticed a "lag" or "skipping" in sequences that were running pretty fast information (like an arch chase). I easily switched the Network Preference to 115.4k on the LOR tab, simple mode, and that solved the problem. No more lag or skipping. Another thing I did was update all firmware on all devices, one at a time, while connected through the HU. That was cool and easy. V4.2.12 Link to comment Share on other sites More sharing options...
Recommended Posts