David K Posted November 26, 2016 Share Posted November 26, 2016 How does one program a Holiday Coro controller as "Unit 1" in LOR? Is it the same as programming an LOR controller? I won't be able to do it until Sunday but I'd like to know how it's done in case I run into issues. I've never used HC controllers before. Thank you!! Link to comment Share on other sites More sharing options...
Mr. P Posted November 26, 2016 Share Posted November 26, 2016 When you say HC controller you have to be more specific as they have several. Link to comment Share on other sites More sharing options...
BMurray Posted November 26, 2016 Share Posted November 26, 2016 Is this an Alphapix or a 27 channel DMX controller or one of the 3 channel DMX controllers Link to comment Share on other sites More sharing options...
David K Posted November 26, 2016 Author Share Posted November 26, 2016 My apologies: a 27 channel DMX controller. Link to comment Share on other sites More sharing options...
BMurray Posted November 26, 2016 Share Posted November 26, 2016 You'll need to assign it to a universe. If you don't have a smart controller that has DMX out you need to get a USB adapter. HC sells one and is simple to set up. http://www.holidaycoro.com/Enttec-Pro-Compatible-DMX-Dongle-p/53.htm Link to comment Share on other sites More sharing options...
David K Posted November 26, 2016 Author Share Posted November 26, 2016 I ordered it! It's arriving in the day next day or so. Is there more to assigning universes than just going through the LOR sequencer? Link to comment Share on other sites More sharing options...
BMurray Posted November 26, 2016 Share Posted November 26, 2016 You'll need to set up a "universe" for it through network preferences in either the SE or LOR tray. HC has a couple of videos on the same page you purchased the adapter on. Link to comment Share on other sites More sharing options...
Recommended Posts