DisneyMatt10 Posted November 26, 2016 Share Posted November 26, 2016 Hey all! First off, I apologize if this has been discussed yet, (which I am sure it has been.) However, now that this season is well under way, I have started planning my next few seasons. I am looking at adding some DMX (I think) moving heads to my light show similar to those seen in this video. The only problem I am running into is that I know NOTHING about these things. I don't know how to program them, how to control them, how to power them, what software, or controllers are needed. . . Seriously, I know NOTHING about them. If anyone has dealt with these any advice you can provide me with is greatly appreciated. I'm needing to know things like: What controller to use? How to power these heads? How to program them? Like I said, any information that anyone can provide me with in regards to these moving heads is greatly appreciated! Thanks in advance, ~Matt Link to comment Share on other sites More sharing options...
default Posted November 26, 2016 Share Posted November 26, 2016 Hey Matt, Firstly, the moving head lights he uses in the video are a bit costly, if you can afford them, then yay for you. I don't remember the exact cost. More watts in the lamps is better. Most you see are for indoor, club settings with fog, etc... Sequencing these type of lights can be tedious at best, but very do-able. Good thing this is being planned for future shows, you have reading to do. Here's a couple of threads that I found, there are more for sure. These should get you started... Alan... 2 Link to comment Share on other sites More sharing options...
DisneyMatt10 Posted June 29, 2017 Author Share Posted June 29, 2017 Time to revive a dead thread!!! I think it was December of last year I went out on a limb and messaged Tom on Facebook asking about his DMX heads, not expecting to ever hear from him. Well, randomly last night I FINALLY heard back from him!! I'm super excited for this. He has been BEYOND helpful, and I'm super excited to get this ball rolling. I've learned what type of DMX heads I am going to need to buy, as well as the protective covers for them. (Sadly the covers are more than the lights!) I had been planning on adding them to the show in 2018 possibly. However, given the cost of the addition to the show, it will be a 2019 addition instead of a 2018 addition. The positive note to the extra year is that it gives me more time to figure them out. The current plan is to buy a smaller less expensive DMX head to "play" with. Basically to help me figure out how to program them, and control them. Once I get it all figured out I will buy the actual show heads. I will also do my best to keep this thread going as I progress through this DMX head journey so if anyone is looking to do the same, hopefully this will be a place they can come for help! 2 Link to comment Share on other sites More sharing options...
B.Y.R.G. Posted June 29, 2017 Share Posted June 29, 2017 How about some prices and maybe a link or two? I'm not planning on doing it as it's a little over the top for me, but just more curious as to what a setup like this would cost. Link to comment Share on other sites More sharing options...
TheDucks Posted June 29, 2017 Share Posted June 29, 2017 Matt I was wondering about how these were being safely used outdoors (weather resistant). Your 'cover' comment answered that. TNX BTW MCM electronics lists some MH units. They are not cheap. 1 Link to comment Share on other sites More sharing options...
DisneyMatt10 Posted June 29, 2017 Author Share Posted June 29, 2017 (edited) 2 hours ago, B.Y.R.G. said: How about some prices and maybe a link or two? I'm not planning on doing it as it's a little over the top for me, but just more curious as to what a setup like this would cost. Our setup will end up costing us about $50k between lights, controllers, covers, and wiring. Edited June 29, 2017 by DisneyMatt10 Link to comment Share on other sites More sharing options...
B.Y.R.G. Posted June 29, 2017 Share Posted June 29, 2017 (edited) 1 hour ago, DisneyMatt10 said: Our setup will end up costing us about $50k between lights, controllers, covers, and wiring. Holy Cow that's a serious investment! Maybe you can get on GCLF and possibly win to recoup that serious coinage. Good luck with this and looking forward to more info from this thread. Edited June 29, 2017 by B.Y.R.G. 1 Link to comment Share on other sites More sharing options...
Jim Posted June 29, 2017 Share Posted June 29, 2017 On 26/11/2016 at 1:19 PM, DisneyMatt10 said: Hey all! First off, I apologize if this has been discussed yet, (which I am sure it has been.) However, now that this season is well under way, I have started planning my next few seasons. I am looking at adding some DMX (I think) moving heads to my light show similar to those seen in this video. The only problem I am running into is that I know NOTHING about these things. I don't know how to program them, how to control them, how to power them, what software, or controllers are needed. . . Seriously, I know NOTHING about them. If anyone has dealt with these any advice you can provide me with is greatly appreciated. I'm needing to know things like: What controller to use? How to power these heads? How to program them? Like I said, any information that anyone can provide me with in regards to these moving heads is greatly appreciated! Thanks in advance, ~Matt you may need to consider local aviation rules as well Link to comment Share on other sites More sharing options...
DisneyMatt10 Posted June 29, 2017 Author Share Posted June 29, 2017 19 minutes ago, Jim said: you may need to consider local aviation rules as well Already tackled that one! Link to comment Share on other sites More sharing options...
DisneyMatt10 Posted July 4, 2017 Author Share Posted July 4, 2017 A small update for you all!! Looks like we are able to get the cost for this addition to the show down to about $20k Which is nice to know!! And that's including the professional to install the mounts to the roof, as well as the covers for them!! Sadly the covers are more than the lights themselves. I'll be buying the controller, and first light towards the end of this month so I can start testing and figuring out how they work, and how to program them!! So be looking for another update around then! 1 Link to comment Share on other sites More sharing options...
Santas Helper Posted July 5, 2017 Share Posted July 5, 2017 Looking forward to seeing future posts on this Matt. 1 Link to comment Share on other sites More sharing options...
kcurryb7 Posted July 11, 2017 Share Posted July 11, 2017 How did you tackle any issues with the local aviation or FAA Link to comment Share on other sites More sharing options...
DisneyMatt10 Posted November 6, 2017 Author Share Posted November 6, 2017 On 7/5/2017 at 6:15 AM, Santas Helper said: Looking forward to seeing future posts on this Matt. Still working towards the goal! It's just a bit slow going. (And REALLY freaking expensive!) On 7/11/2017 at 2:37 PM, kcurryb7 said: How did you tackle any issues with the local aviation or FAA Let's just say I've got connections! But honestly, really LONG story short I have the phone number that directly connects me to our airports control tower, and so I called them and they put me in touch with the right people! Who made me jump through hoops to get the okay to add them to the show. (It makes things more difficult when your home sits nearly in the middle of the flight path for planes landing and taking off!) Link to comment Share on other sites More sharing options...
Santas Helper Posted November 6, 2017 Share Posted November 6, 2017 (edited) 13 minutes ago, DisneyMatt10 said: But honestly, really LONG story short I have the phone number that directly connects me to our airports control tower, and so I called them and they put me in touch with the right people! Who made me jump through hoops to get the okay to add them to the show. (It makes things more difficult when your home sits nearly in the middle of the flight path for planes landing and taking off!) I know the feeling living really close to an airport Matt. Not as close as you but close enough to be watchful of what I do. Of course working for the FAA I'm supposed to know better. ? Edited November 6, 2017 by Santas Helper Link to comment Share on other sites More sharing options...
DisneyMatt10 Posted November 6, 2017 Author Share Posted November 6, 2017 1 minute ago, Santas Helper said: I know the feeling living really close to an airport Matt. Not as close as you but close enough to be watchful of what I do. Of course working for the FAA I'm supposed to know better. ? Haha, well since you work for the FAA just make sure you tip-toe the line a bit! Link to comment Share on other sites More sharing options...
Mikepro02 Posted December 24, 2017 Share Posted December 24, 2017 Hi Matt, Was wondering how it was going with the moving heads you were looking to add to your display. If you need any help still let me know even though I am new to the whole lor lighting scene I have 33 years of experience in mobile dj industry in ny and about 15 years experience with operating dmx moving heads. I don't know which heads you were told to purchase and how many but since led has become more common in these lights in the past 8 years or so the pricing for quality lights at a reasonable price has become more the norm. Link to comment Share on other sites More sharing options...
Recommended Posts