Using Visualizer with the Pixel Editor

[MattBrown]

There is a new document available that demonstrates how to use the Visualizer with the Pixel Editor and Sequence Editor. It is located at:

http://www1.lightorama.com/PDF/UsingVisualizerWithPixelEditor-RevA.pdf

[chowell]

Thank you Matt.  If I use Aux A network to run part of my show, will this configuration screw things up?  If so, can I set this up using say...aux b?

 

Thanks in advance.

Corey

[SPaschall]

The config should be ok as long as they match in PE and your Network Configuration.

SPaschall

[MattBrown]

The new document is written as a demonstration of what is possible. The settings in the document were chosen to match the sample Visualizer file for the CCR tree which comes with the LOR Software Suite. There is nothing magical about those settings. The principle is that the settings in the Pixel Editor must match what is in the Visualizer file and in Network Configuration. As long as everything matches, it will work.

Matt