Rusty Posted October 13, 2016 Share Posted October 13, 2016 I configured the Pixcon according to instructions. I hooked it up to J3 using the USB adapter so I have communication. I hooked up WS2811 pixels and when I plug in the controller the lights stay on white and I can't control the lights. Please help, this controller is difficult to work with. Link to comment Share on other sites More sharing options...
wbaker4 Posted October 13, 2016 Share Posted October 13, 2016 Some 2811's are not really 2811's. Try high and low speeds for those - or - select 1804's. Use the built in self test to test the lights. Link to comment Share on other sites More sharing options...
Rusty Posted October 13, 2016 Author Share Posted October 13, 2016 High speed fixed the lights staying on problem. Test pattern displayed correct colors. But, now when I play the sequence lights aren't doing what they're supposed to be doing. Any info on this problem? Link to comment Share on other sites More sharing options...
Mr. P Posted October 13, 2016 Share Posted October 13, 2016 Did you check the J3/J4 box in the Network Configuration? The Pixcon must be run in LOR enhanced mode (ELOR). Do you have the red USB485 adapter and a Pro level license? Link to comment Share on other sites More sharing options...
Rusty Posted October 13, 2016 Author Share Posted October 13, 2016 I got it working. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts