Wayne K Posted September 9, 2016 Share Posted September 9, 2016 (edited) I have decided to get into the pixels and experiment with them. I have 4.2.12 with advance license. I can make the pixels go blinky with the computer connected thru the ethernet port to my router with DMX set up and also thru the pixell console. But I cannot get them to work thru the usb485 adapter / lor network? In sequence editor I have the first channel and the rest accordingly Lor, regular I have com port set and the speed set to Com5 lor 500K J3/J4 checked on pixels as WS2811/12 Maximum 170 pixels checked High speed checked on Ports setup as first port ID of 30 and the next port at 31 Start circuit 1, 50 pixels, end unit 30 on first port, 31 on second port, end circuit 150, triplet order rgb, I am not sure what else to try. Thanks Wayne Edited September 9, 2016 by Wayne K pictures did not attach Link to comment Share on other sites More sharing options...
Mr. P Posted September 9, 2016 Share Posted September 9, 2016 (edited) The pixcon requires enhanced LOR network which is the Pro level license. You can use it on the advanced license in e1.31. Edited September 9, 2016 by Mr. P Link to comment Share on other sites More sharing options...
Wayne K Posted September 9, 2016 Author Share Posted September 9, 2016 Mr.P You were right, I did not catch the license thing.It appears to be working now. Thanks for the info Wayne Link to comment Share on other sites More sharing options...
Recommended Posts