Gilbert Ramos Posted February 8, 2008 Share Posted February 8, 2008 I would like to know what LOR controllers or software work with LED Lights, without having to use other light ( C-7's) to turn them on.This will be my first year using LED lights with my display.I am using the CTB controllers both the 8 and 16 channels, and the LOR 1.6.5 software.Gilbert Link to comment Share on other sites More sharing options...
Guest wbottomley Posted February 8, 2008 Share Posted February 8, 2008 All controllers should work. But, that depends what kind of LED's you're using. I remember reading a post a while back that said, certain kind of LED's doesn't work with fading to well. Can't remember where that is right now. Link to comment Share on other sites More sharing options...
Gilbert Ramos Posted February 8, 2008 Author Share Posted February 8, 2008 I am using the 35 and 60 count sets from Walmart Link to comment Share on other sites More sharing options...
Scott Blessing Posted February 8, 2008 Share Posted February 8, 2008 I don't know if they are the same, but last year I picked up a dozen or so boxes of LED's from wall mart just to try them out. Mine did not work the way I thought they would. It was OK because I only used them to outline the roof so I was able to componsate for that, not all LED's are user friendly with dimming and fading, get one box and try them out first so you know. Link to comment Share on other sites More sharing options...
Gilbert Ramos Posted February 9, 2008 Author Share Posted February 9, 2008 Thank you for the information. I will be trying them out in the next week or so.I am planing on building some fans, with these lights, I will post an update on how it works out. Link to comment Share on other sites More sharing options...
Recommended Posts