Jump to content
Light-O-Rama Forums

Which star for a CCR Tree?


KeysNole

Recommended Posts

Which star does everyone use for a CCR tree? DIY or already assembled? Any help or thoughts would be appreciated!

Link to comment
Share on other sites

I also got one from Superstar lights. The kit is well thought out. Holes Drilled perfictly, LED string has exact number of Leds for each channel.  My upgrades were to replaced the screws that are used to assemble star with stainless screws so rust on the star would not be a problem later on. I also sealed the joints with Goop glue. I just don't want water getting inside the Star. I mounted mine on 1/2" fiber board so I could mount the end of the CCR's to an area between the bottom 2 points of the star. Turned out nice.

Link to comment
Share on other sites

I too have one of Brians 6 channel stars. They work great but I just ordered this https://www.christmaslightshow.com/24-rgb-star-flare-metal-frame-only.html

I am switching completely over to rgb and the 6 channel star will be the last thing to go. I may consider selling it but not sure just yet.

  • Like 1
Link to comment
Share on other sites

12 hours ago, KeysNole said:

ebrown, if you decide to sell please email me at marathonvacations@gmail.com.

will do

Link to comment
Share on other sites

  • 2 weeks later...

I am using a somewhat custom version of Brian's star.  He did not drill the holes in the front face and I have RGB strip on the inside.  It came out very well, but I'm rebuilding the RGB inside to increase the number of pixels from 360 to almost 600.  There are photos on my website, but as I type this, my web server is down so you can't see them.  Once I get my server back in service, you can see them at http://www.newburghlights.org

Link to comment
Share on other sites

  • The topic was locked
Guest
This topic is now closed to further replies.
×
×
  • Create New...