jerrymac Posted January 1, 2016 Posted January 1, 2016 If using LOR controllers in DMX mode (with a crossover cable), will ELL's work in DMX mode?
jerrymac Posted January 7, 2016 Author Posted January 7, 2016 Still no answers ? Admin? can ELL be used in dmx mode from a LOR controller?
colonel Posted January 7, 2016 Posted January 7, 2016 No, they aren't fast enough. But you can mix ELL/485 and e1.31. Just define in the network config and map your devices.
plasmadrive Posted January 7, 2016 Posted January 7, 2016 I run ELLs for my LOR controllers with regular light strings and e1.31 for everything pixel. Works great. I also take off any DMX I need from the either the bridge or the Pixlite controllers.. I found this works so well I have no need to run any single universe DMX out of LOR and the USB
jerrymac Posted January 7, 2016 Author Posted January 7, 2016 Missing the point, must not have asked the question correctly. Converting LOR controllers to DMX. Want to use the ELL's in DMX mode with the LOR controllers (running DMX) to overcome area's where I can NOT run CAT 5 cable (across road etc). Will the ELL's work? NOT using high data lights (Strips / Pixels) in this portion of the application.
plasmadrive Posted January 7, 2016 Posted January 7, 2016 No.. you asked the right question.. you just got the wrong answer from me.. sorry. Colonel is correct.. they won't work. Komby has some new low cost DMX wireless stuff. Check out his web page.
Recommended Posts