worksopian Posted December 17, 2015 Share Posted December 17, 2015 Went out last night to try and video my show and saw an issue wiwth my minitree's. They are not firing in the correct order.This morning, I went out and checked the wiring then hooked up directly to my laptop and created and ran a simple chase animation.Lights are firing in what appears to be reverse on both sides of the controller so what should e 1,2,3,4 is 4,3,,2,1 and tthe same on the other side.....any body know what is up? Link to comment Share on other sites More sharing options...
wbaker4 Posted December 17, 2015 Share Posted December 17, 2015 Connectors are labeled 1-24. 1,2,3 is channel 1 ---- 4, 5, 6 is channel 2, etc. Link to comment Share on other sites More sharing options...
worksopian Posted December 17, 2015 Author Share Posted December 17, 2015 Yup all connected and labeled....same issue Link to comment Share on other sites More sharing options...
wbaker4 Posted December 17, 2015 Share Posted December 17, 2015 I use two of those boards in my set-up. All are working correctly. Link to comment Share on other sites More sharing options...
worksopian Posted December 17, 2015 Author Share Posted December 17, 2015 I have 2 of them too.....other one is working fine! Link to comment Share on other sites More sharing options...
Mr. P Posted December 17, 2015 Share Posted December 17, 2015 You can test each individual channel in the HU. Link to comment Share on other sites More sharing options...
worksopian Posted December 17, 2015 Author Share Posted December 17, 2015 Gonna have to try that again.....Is how I initially found the problem....HWU seems to work but sequences don't? Link to comment Share on other sites More sharing options...
wbaker4 Posted December 17, 2015 Share Posted December 17, 2015 "HWU seems to work but sequences don't?" ... sounds like a channel configuration issue in your sequences. Link to comment Share on other sites More sharing options...
worksopian Posted December 17, 2015 Author Share Posted December 17, 2015 (edited) So I went back outside.....(it's cold too) used the HWU on a slow chase and reconnected the whole thing so that it works......I will need to play with this at the end of the season. Thanks for the replies and advice guys! Steve My channel config is fine on the sequences! Edited December 17, 2015 by worksopian Link to comment Share on other sites More sharing options...
Jim Hans Posted December 17, 2015 Share Posted December 17, 2015 I don't have a computer with HU on it available so I can't be more detailed, but in HU there is a checkbox about reversing the order, if it is checked, uncheck it or vice versa. That will solve your problem. Link to comment Share on other sites More sharing options...
Recommended Posts