southrndragracer Posted December 5, 2015 Share Posted December 5, 2015 Hello, I have a ctb16pc v1 and I have only 17volts on all outputs. I have 120 volts on one pin of the opto isolator chips.any help would be appreciated Link to comment Share on other sites More sharing options...
southrndragracer Posted December 5, 2015 Author Share Posted December 5, 2015 also have 120v on the 220 ohm resistor and 120v on the center leg of all triacs. changed out one triac and opto isolator chip on one channel to see if that might of been it and still has real low voltage on all outputs Link to comment Share on other sites More sharing options...
HowardShank Posted December 5, 2015 Share Posted December 5, 2015 Did you accidentally put a limit on the outputs in the hardware utility?Hardware Utility -> Select unit -> CONFIG (button on bottom) Link to comment Share on other sites More sharing options...
Recommended Posts