Todd_91 Posted November 21, 2015 Share Posted November 21, 2015 I have the following: 1) G3-MP3 Show Director with latest firmware.2) ELOR a) two 24 channel dmx for landscape lighting 4 - 16 Channel LOR controls c) 100 bulb CCB light set My songs do not sync up correctly have tried they following, all programmed thur the hardware utility on a 4GB SD card, I have tried the following: 500K Network speed, Strip MP3 Header, Lock Step. ( NO RGB work with this configuration)115.4k, Strip MP3 Header (All RGB's work but lights end before song)115.4k (Unplugged the CCR Bulbs from the network) This configuration is the works very close but lights still end before the song.57.6k ( Song is not even close to finished when the lights finish. Any help would be a appreciated. Thanks, Link to comment Share on other sites More sharing options...
Todd_91 Posted November 21, 2015 Author Share Posted November 21, 2015 Update: I removed the ELOR completely and the lights still end before the song.Everything looks fine in the visualizer Link to comment Share on other sites More sharing options...
Jim Hans Posted November 22, 2015 Share Posted November 22, 2015 Are the songs constant bit rate? Link to comment Share on other sites More sharing options...
Todd_91 Posted November 22, 2015 Author Share Posted November 22, 2015 How do I check if the songs are a constant bit rate? Link to comment Share on other sites More sharing options...
Recommended Posts