worksopian Posted September 22, 2015 Share Posted September 22, 2015 I want to use the 8 pack flood kit for landscape lighting and am trying to use the schedule timer, but after downloading a basic .las file and running in test the program did not run. Am I missing something? Is it easier to use a separate timer and have the card set to work when power is on? Thanks in advance for your suggestions. Link to comment Share on other sites More sharing options...
mpageler Posted September 22, 2015 Share Posted September 22, 2015 Here's a video on how to do it. https://www.youtube.com/watch?v=wugkn0j3Zag Link to comment Share on other sites More sharing options...
worksopian Posted September 22, 2015 Author Share Posted September 22, 2015 (edited) Here's a video on how to do it. https://www.youtube.com/watch?v=wugkn0j3ZagThanks mpageler, John Storms video actually shows how to use the 'Start when powered on" and I was hoping to use the time schedule instead. I followed the steps in the video up to the trigger and tried setting a schedule, but when i powered off and back on after positioning the controller and flood lights in the yard the lights did not come on. Also, the schedule method is not in the manual? Edited September 22, 2015 by worksopian Link to comment Share on other sites More sharing options...
jstorms Posted September 28, 2015 Share Posted September 28, 2015 How to use the schedule editor: Link to comment Share on other sites More sharing options...
Recommended Posts