EvilM0nkey Posted September 18, 2015 Share Posted September 18, 2015 I'm not an expert at sequencing yet so I may be missing something.My 50W floods are great! I'm looking forward to running them in my show and probably adding 2 more of them. However I don't always want to use them for blinders. Is there a way to change the intensity with colors? Or even use fades? Link to comment Share on other sites More sharing options...
PhilMassey Posted September 18, 2015 Share Posted September 18, 2015 http://www1.lightorama.com/help/effects.htm And http://www1.lightorama.com/help/the_tools_menu.htm#colorfade Link to comment Share on other sites More sharing options...
zman Posted September 18, 2015 Share Posted September 18, 2015 You can define the DMX intensity to any DMX value and it will output that value if that is allowed for your flood.. Or, depending on your flood, there may be a DMX channel that controls that as well. You did not indicate which floods you have. One way to ramp or fade is to set the beginning DMX value, set the end DMX value and use the "Fill" command between those timings. Link to comment Share on other sites More sharing options...
EvilM0nkey Posted September 19, 2015 Author Share Posted September 19, 2015 I guess I should have been more specific. I have the 50W RGB flood lights from LORhttp://store.lightorama.com/hipo50wrgbfl.html Link to comment Share on other sites More sharing options...
Don Posted September 19, 2015 Share Posted September 19, 2015 Right click on the area and select 'Change Intensities" Link to comment Share on other sites More sharing options...
Recommended Posts