sysco Posted December 3, 2014 Share Posted December 3, 2014 My hardware utility is only finding boxes 1 and 2 out of 5 boxes. It was finding them all the other night and now only 2. Changed cables and fuses. Lights will go solid then start blinking off and on..solid..blink..solid..blink. Any ideas?? Link to comment Share on other sites More sharing options...
Denny Posted December 3, 2014 Share Posted December 3, 2014 By cables, I assume you mean the cat5e cables? If the leds are lit, blinking or solid, I doubt you have a power (fuse) problem. Are the boxes that the hardware utility is finding the first two in the chain and the problem is with the rest of them? If so, I would change out the cat5e cable between controllers 2 & 3 with a known good cable, just to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts