Brian Leske Posted September 26, 2014 Share Posted September 26, 2014 I have a CTB16K and one channel stays on.I replaced the triac with one of these and still stays on.Is this the correct triac or something else going on? Triac...>>>>> http://www.mouser.com/Search/ProductDetail.aspx?R=BTA16-600BWRGvirtualkey51120000virtualkey511-BTA16-600BW Link to comment Share on other sites More sharing options...
chandalen Posted October 3, 2014 Share Posted October 3, 2014 Have you checked the solder runs under the board to make sure they are not shorted to anything? When the board is not connected to a computer is the channel still on? Link to comment Share on other sites More sharing options...
Brian Leske Posted October 4, 2014 Author Share Posted October 4, 2014 I emailed LightORama support. They are going to send out the Triac to me.To answer your questions....There is no short and the light stays on with no computer hooked up.I will give you the final results once the new Triac gets installed. Link to comment Share on other sites More sharing options...
Jerry Posted October 20, 2014 Share Posted October 20, 2014 Welcome to the world of LOR controllers,,,,,You are NOT alone ! Link to comment Share on other sites More sharing options...
Brian Leske Posted October 21, 2014 Author Share Posted October 21, 2014 It was the Triac. But mostly human error. If channel 6 is the one stuck on, you need to change the number 6 triac. I changed the number 3 triac because I forgot how to count. That was an oops.. Link to comment Share on other sites More sharing options...
Recommended Posts