jbadger Posted September 10, 2014 Share Posted September 10, 2014 I am new to using LOR sequencing, and am having trouble setting an RGB cell(s) to a specific RGB color with a fade up or down. Changing color seems to cancel the fade, and fading sets the colors to some intensity of equal values on the channel i.e an orange cell becomes 50% R 50%G 0%B. Thanks in advance for any assistance. Link to comment Share on other sites More sharing options...
Ron Boyd Posted September 10, 2014 Share Posted September 10, 2014 (edited) Use this tool:https://www.dropbox.com/s/oinsvfhdnqv3zni/Colorfade%20tool.jpg?dl=0 Edited September 10, 2014 by Ron Boyd Link to comment Share on other sites More sharing options...
steve synek Posted September 10, 2014 Share Posted September 10, 2014 (edited) Or watch thisvideoand many more helpful videos linked at the top of this page. Steve Edited September 10, 2014 by steve synek Link to comment Share on other sites More sharing options...
jbadger Posted September 10, 2014 Author Share Posted September 10, 2014 Thank you, I will look into the tool and videos ! I appreciate the help. Link to comment Share on other sites More sharing options...
jbadger Posted September 17, 2014 Author Share Posted September 17, 2014 if the experts here could indulge me one more time (please) ? Now that I was introduced to color-fade, I was hoping there was a trick to change the color of an RGB track or selection without disturbing the fade? thanks again, I have let the software intimidate me for a year now, and am finally wading in. Link to comment Share on other sites More sharing options...
Recommended Posts