Jump to content

Can I daisychain DMX connected LOR controllers?


iflights
 Share

Recommended Posts

Didn't see this question asked specifically, but the diagrams do kinda suggest I can connect my DMX bridge output to my 1st LOR controller and daisy chain the subsequent controllers on the same universe, like I would with my USB485 adapter running LOR protocol.

 

Can anyone validate that?

Link to comment
Share on other sites

Yes.  As long as all the devices are running the same protocol (DMX in this case), you can daisy chain them.  Just be sure to set the starting channel number per the controller's instruction manual for DMX.

Link to comment
Share on other sites

Also be aware that LOR DMX over Cat5 wiring protocal may be differnent than your other DMX over cat 5 wiring

 

if you are mixing LOR with other DMX devices you may need to build a  crossover cable

http://www.holidaycoro.com/kb_results.asp?ID=46

 

 

Thank you both!  Good information on this.  

Link to comment
Share on other sites

  • Don locked this topic
Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...