wgateman Posted March 23, 2014 Share Posted March 23, 2014 HELP - this is really making me crazy - what settings can you use to make this dumb thing work? The dumb ribbon says it is 150 LED's, but 1 pixel - but if you set it to 1 pixel on a light string you get ONE light - this really should not be so hard, why can't they setup defined entries for the stuff they sell. Then how do you set this up in the S3 - if you add the device (here they have it in dropdown) and select RGB - is each row equal to one of the 8 ribbons I want to use? The help file is no help on that either - Link to comment Share on other sites More sharing options...
Don Posted March 24, 2014 Share Posted March 24, 2014 You are hooking this up to a CMB (DC) controller, correct? If so, just set up a single DMX channel that corresponds to the UnitID of the CMB, and channel(s) that you are using on the controller. (1,2,3 or 13,14,15 - etc.) Link to comment Share on other sites More sharing options...
scubado Posted March 24, 2014 Share Posted March 24, 2014 I think Don made a mistake. If you're using the CMB controller, you setup a RGB channel for that ribbon. One ribbon will use channels 1,2 and 3. Second ribbon will use channels 4,5 and 6. Link to comment Share on other sites More sharing options...
Don Posted March 24, 2014 Share Posted March 24, 2014 Yeah, RGB not DMX. Thanks, Jim. Link to comment Share on other sites More sharing options...
Ron Boyd Posted March 24, 2014 Share Posted March 24, 2014 https://www.dropbox.com/s/mua4hxme37lcpgj/CMB%20Setup.las Here's what it should look like in your Channel Config in S3 Link to comment Share on other sites More sharing options...
Recommended Posts