craigecooper Posted December 29, 2013 Share Posted December 29, 2013 Probably a simple explanation that I am missing. DMX Star works fine in xLights test mode on the same PC running LOR S3 adv. I can't seem to get S3 configured to control the star. When adding an adapter under network preferences, I don't see Entec Pro, just a meaningless "p7xxxxxx" tag. Guessing that's why it's not controlling anything but not sure what to try. Can anyone help ? Link to comment Share on other sites More sharing options...
Mike G Posted December 29, 2013 Share Posted December 29, 2013 I'll just ask to start. Do you have a dmx universe setup in lor and channels assigned? Link to comment Share on other sites More sharing options...
craigecooper Posted December 29, 2013 Author Share Posted December 29, 2013 uploaded screenshots of network pref DMX and LOR S3 channel setup Link to comment Share on other sites More sharing options...
Ken Benedict Posted December 29, 2013 Share Posted December 29, 2013 The P7xxx is the internal serial number of the Enttec unit. You should write it on the outside of the dongle. See this video: https://www.youtube.com/watch?v=NlXtOa7yW4kAnd this one: https://www.youtube.com/watch?v=4BbYsPzyTQU&noredirect=1And: https://www.youtube.com/watch?v=9apwKcVtCF4 1 Link to comment Share on other sites More sharing options...
craigecooper Posted December 29, 2013 Author Share Posted December 29, 2013 i figured it out. The RGB channel in LOR with 3 addresses set did not flow thru to R, G & B below. I set each of those colors individually with an address and it works now. Link to comment Share on other sites More sharing options...
Recommended Posts