mixnight Posted December 23, 2013 Share Posted December 23, 2013 I'm looking for the SE channel configuration for E682 controller from sandevices.com for 12 ccr/50 pixel/150 ch. all DMX with 4 universes.Thanks in advance Link to comment Share on other sites More sharing options...
Tim Fischer Posted December 23, 2013 Share Posted December 23, 2013 Not sure what you're asking. The starting channel for each cluster will be listed in the Sandevices config screen. Everyone potentially sets theirs up differently so we can't just send you a config file. Link to comment Share on other sites More sharing options...
iflights Posted December 23, 2013 Share Posted December 23, 2013 Hope this will help you out, now and in the future. The Vegomatic tool here will allow you to create channel configurations by building channels and universes within a few seconds. http://itsmebobo.com/SD.html Link to comment Share on other sites More sharing options...
mixnight Posted December 24, 2013 Author Share Posted December 24, 2013 Tim I got the sandevices web page working, but I still having problem with my channel configuration in Sequence Editor because the sequence that is created from superstar to SE has every Chanel set up for LOR controllers and I have to change every single channel in the SE ch Configuration to DMX/universe/channel manually and I have a 12 ccr (50pixels/150 ch per pixel) mega tree and I'm using E682 from sandevices, please watch my two videos and compare ithttp://youtu.be/RsAR9Ow6e4whttp://youtu.be/3qZ5-iot9V4First video everything is out of place, in the second video everything is in place but at my mega tree ccr 1-5 are out of place and from 6-12 are ok (see video #3) Link to comment Share on other sites More sharing options...
mixnight Posted December 24, 2013 Author Share Posted December 24, 2013 Hope this will help you out, now and in the future. The Vegomatic tool here will allow you to create channel configurations by building channels and universes within a few seconds. http://itsmebobo.com/SD.htmlThanks Iflights, I just downloaded the Vegomatic and I exported the vegomstic LCC config file and imported into SE as a ch config and I really mess up the whole seq plus it created 12 universes ( I just have 4 universes from superstar and SE).Any other suggestion? Link to comment Share on other sites More sharing options...
Dennis Laff Posted December 24, 2013 Share Posted December 24, 2013 Whats the reason to run the ccr's thru the 682 Link to comment Share on other sites More sharing options...
mixnight Posted December 24, 2013 Author Share Posted December 24, 2013 Whats the reason to run the ccr's thru the 682It was last minute desicion to have ccr, and the best and fast option to have it was the E682 and the cheaper price for the E682 and the ccr Link to comment Share on other sites More sharing options...
Dennis Laff Posted December 24, 2013 Share Posted December 24, 2013 That makes sense so you just bought smart ribbons not lor ccr's Link to comment Share on other sites More sharing options...
iflights Posted December 25, 2013 Share Posted December 25, 2013 Thanks Iflights, I just downloaded the Vegomatic and I exported the vegomstic LCC config file and imported into SE as a ch config and I really mess up the whole seq plus it created 12 universes ( I just have 4 universes from superstar and SE).Any other suggestion? Vegomatic has the ability to suck in your existing channel configuration and export an appended version, with the new universes and channels, and tracks. You might need to play a bit with it by changing some values around. Always keep a backup of your original channel config so you have a good starting point each time. Link to comment Share on other sites More sharing options...
Recommended Posts