mrcobra92 Posted December 22, 2013 Share Posted December 22, 2013 Quick question, when my show is finished, would it damage the controller at all to simply have all of the lights turn on for the remainder of the night? Not repeat the show, simply stay on. Link to comment Share on other sites More sharing options...
k6ccc Posted December 22, 2013 Share Posted December 22, 2013 Not a problem at all unless you are exceeding the current capacity of the controllers with everything full on. My guess BTW is that you would not want everything full on as it would likely be pretty bright. Link to comment Share on other sites More sharing options...
Tony Shepherd Posted December 22, 2013 Share Posted December 22, 2013 I only run my show till 9 in the evening then I switch to a static display with just the main lights on. To achieve this I build a animation sequence with the lights on that I want and add it into the show editor to loop. It works fineHope this helps. This is only my second year but you pick up a lot of good info in these forums.Tony Link to comment Share on other sites More sharing options...
atver Posted December 22, 2013 Share Posted December 22, 2013 Instead of full on you might dim your lights say down to 50% as an example so they are not so bright using an animation program as some users on this forum have made. Link to comment Share on other sites More sharing options...
mrcobra92 Posted December 22, 2013 Author Share Posted December 22, 2013 Great, thanks for all of the help. Link to comment Share on other sites More sharing options...
Recommended Posts