Jump to content
Light-O-Rama Forums

Sticking Channel


mrduncan

Recommended Posts

Here's my problem.......I have 5 - 16 channel LOR controllers and one controller randomly has one or two channels stick "ON" on the first bank (1-8) of channels.  The sticky channel turns off after it is commanded to turn "ON" and "OFF" again.  Any idea on what the problem is?

Link to comment
Share on other sites

Do you have a small number of LED's on these channels? If so, try putting an incan light on the end of the string. I've heard that sometimes the current draw is so small on LED's that they don't meet the threshold for working the on/off. Others smarter than me can chime and and correct me.

Link to comment
Share on other sites

I've seen the same as Jim.

 

I've also had this happen on some little LED deer with so little draw that it had problems. I hooked it up to a set of incandescent net lights, hid the lights in a bucket, and it was fine.

Link to comment
Share on other sites

  • The topic was locked
Guest
This topic is now closed to further replies.
×
×
  • Create New...