uncledan Posted December 10, 2013 Share Posted December 10, 2013 I noticed the static elements of my display were going on for 2 seconds and staying off for about a minute tonight. I was able to run everything through hardware utility ok. Closed everything down and seems to be ok. For now... The status light on my dio32v3 was blinking red. Relays would engage for 1-2 seconds and stay off for a minute. Dio32 is the first controller in the daisy chain from my PC. All other 20 controllers working fine. I assume it's not a problem with cat5 from usb485 to the dio32 or the rest of display would be down as well. Any input please...!! Thanks in advance! Link to comment Share on other sites More sharing options...
Recommended Posts