Eric Nanista Posted December 7, 2013 Share Posted December 7, 2013 Do i need to get a special board to control a relay or will a CTB16pc do it? Link to comment Share on other sites More sharing options...
jlarson Posted December 7, 2013 Share Posted December 7, 2013 I have ran relays with my show for a few years with no problems. Link to comment Share on other sites More sharing options...
atver Posted December 7, 2013 Share Posted December 7, 2013 You can pickup a 120vac relay from Radio Shack and connect it to one of your controller 120vac output channels. Make sure you enclose the relay in a plastic case for safety reason. Link to comment Share on other sites More sharing options...
BigWally11 Posted December 16, 2013 Share Posted December 16, 2013 I'm a master electrician who works with industrial equipment most of the time. Relays work great as long as you do not utilize effects like fade twinkle etc. just simple on and off with at least 1 second between the changes.Remember relays only have on and off and a limited number of closures before they fail. Link to comment Share on other sites More sharing options...
Recommended Posts