vdipaola73 Posted December 6, 2013 Share Posted December 6, 2013 Everything was working fine then...........NADA.... It is powering up and flashing but no signal. I moved some CAT5 cables around to see if that was it by chance but nope. Cables all good. Thoughts on what to do next?? Link to comment Share on other sites More sharing options...
grump010 Posted December 7, 2013 Share Posted December 7, 2013 Check with the hardware utility and verify that the HW can find it, if not reset the controller per manual by removing the jumper, power cycle and replace jumper,then recheck wih the hardware utility would be my suggestion. Link to comment Share on other sites More sharing options...
vdipaola73 Posted December 7, 2013 Author Share Posted December 7, 2013 I ended up powering it down several times and crossing my fingers then HU found it again. First year with LOR and I was about to have a coronary. Thank for your suggestion. Link to comment Share on other sites More sharing options...
Recommended Posts