MikeA Posted December 3, 2013 Share Posted December 3, 2013 All channels stuck on, no LED status light and all controllers hooked up after this one will not work unless it is unplugged. Any help? Link to comment Share on other sites More sharing options...
DaGoose Posted December 3, 2013 Share Posted December 3, 2013 Have you set the unit id's through hardware utility? Link to comment Share on other sites More sharing options...
plasmadrive Posted December 3, 2013 Share Posted December 3, 2013 That wouldn't really have much to do with the controllers down stream I would think... Pull the comm chip out.. it is probably shorted.. then the other controllers down stream should work. If not, you have more issues.. Link to comment Share on other sites More sharing options...
MikeA Posted December 3, 2013 Author Share Posted December 3, 2013 Yes, unit ID is set. It worked during testing. All I have to do is unplug it from power and the controllers downstream work. Plug it in, all channels come on and no LED status light and nothing downstream works. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now