TODD HILL Posted November 12, 2013 Share Posted November 12, 2013 I AM HAVING TROUBLE WITH THE ELL. WHEN I OPEN HWU LIGHT 1 BLINKS SLOWLY LIGHT 2 BLINKS FASTER. WHEN I TEST THE RGB LIGHTS WITH A CMB16D CONTROLLER THE RGB COMES ON FOR ABOUT 2 TO 3 SECONDS BUT THE LIGHTS IN THE ELL GO OUT, THE RGB ALSO SHUT OFF AUTOMATIC. WELL NOT SEND SIGNAL IN SEQUENCE. NEED SOME ADVICE. Link to comment Share on other sites More sharing options...
plasmadrive Posted November 13, 2013 Share Posted November 13, 2013 Which USB dongle do you have? I think you need the booster to run the ELL. Link to comment Share on other sites More sharing options...
TODD HILL Posted November 13, 2013 Author Share Posted November 13, 2013 i am using the 485b. And it seems to work at time just not consistent. Link to comment Share on other sites More sharing options...
plasmadrive Posted November 13, 2013 Share Posted November 13, 2013 Ya know.. I had that same problem last year now that I think of it.. turned out to be the RJ45 socket on the ELL. I switched it to the other and it worked fine ever since. Worth a try on yours. Link to comment Share on other sites More sharing options...
Frank Farmer Posted November 15, 2013 Share Posted November 15, 2013 Todd, try dropping your speed on your network to 57.6K and see if it works. I just had to do this to use my ELL's for some testing. I don't use them in my Christmas lightshow (yet).From what I can tell you can change the speed on the ELL's to 115K, but you have to go into the ELL configuration to do it, these don't autospeed adjust. According to the manual:Right out of the box, it isconfigured to operate at 57.6K on frequency 16. Link to comment Share on other sites More sharing options...
Recommended Posts