redsea300 Posted November 11, 2013 Share Posted November 11, 2013 OK so I will try to explain best as possible. I am running 12 ccr horizontal grid full length. During one song only pixel #49 won't due red. It is programmed properly just wont turn on red. Only one string and only pixel 49. All other songs it is fine. It won't play in visualizer either. I thought something was wrong with visualizer so I wasn't worried. I ran it tonight and no red on pixel 49. Any ideas.Thanks in advanceDon C. Link to comment Share on other sites More sharing options...
scottam67 Posted November 11, 2013 Share Posted November 11, 2013 I have a similar problem with CCB string. Red and green good but no blue. When white, bulb is yellow. Guess is blue pixel is bad. Contacted LOR and they sent replacement to swap out, I just need to cut off and replace 50 zip ties. Link to comment Share on other sites More sharing options...
redsea300 Posted November 12, 2013 Author Share Posted November 12, 2013 It is not a bad pixel. It is only off in this one song. All other songs it is fine. I tried just turning it on 100% red and nothing. Link to comment Share on other sites More sharing options...
k6ccc Posted November 12, 2013 Share Posted November 12, 2013 If it's only one song and fails on both the CCR and visualizer, I would say you have something amiss in the channel config in that one sequence. Check very carefully... Link to comment Share on other sites More sharing options...
redsea300 Posted November 13, 2013 Author Share Posted November 13, 2013 Found it Thanks k6ccc/ JIM. That one pixel on red was on the wrong network. Thanks for the help. Link to comment Share on other sites More sharing options...
k6ccc Posted November 13, 2013 Share Posted November 13, 2013 That would do it! Glad that I was able to help. Link to comment Share on other sites More sharing options...
Recommended Posts