sasmuse Posted October 27, 2013 Posted October 27, 2013 Has anyone ever done 2 12-ribbon ccr trees? If so, how did you program it? What sorts of issues (if any) did you run into? Our church is thinking about doing this. One on each side of the platform about 40 feet apart with the 2 trees doing the same thing. Any feedback/suggestions would be greatly appreciated. thanks,Sally
john fulkerson Posted October 27, 2013 Posted October 27, 2013 if im not mistaken you would make 1 tree a clone of the other each controller would have the same network id as the first one it seem you would use a splitter to get the same network signal to both don't hold me to it I may be wrong regards and good luck john
George Simmons Posted October 27, 2013 Posted October 27, 2013 Sounds doable to me. If you're running a 500K network you can daisy-chain them all together in one network just like any other controllers. If no 500K, then you'll want two networks. I'd recommend copy/pasting the sequencing, but assigning separate unit IDs to each controller.
Recommended Posts